SPARAMOSCA is a professional, electric microdosing sprayer, specific for distributing the product in microdoses.
• MICRODOSE mode:
It is used to distribute Spintor Fly and similar products against the olive and fruit fly (cherry, persimmons, citrus fruit) It is equipped with an electronic system to obtain semi-automatic dispensing of individual sprays. There is a wheel to adjust the quantity of the jet with precision, from a minimum of 5 ml up to a maximum of 60 ml each. Each time you press the button on the gun, you have the certainty of always spraying the same predetermined dose (e.g. 20 ml). The tank has a capacity of 12 litres (2 hectares, envisaging the distribution of 5 litres of mixture per hectare).
The spray can reach a distance of 6 metres.
• STANDARD MODE:
Continuous jet flow for the distribution of traditional pesticides.
TECHNOLOGY - sprays with precision to the nearest millilitre
SPARAMOSCA is equipped with a small electronic control unit situated in the body of the tank.
A wheel connected to the control unit allows to adjust the dose to be distributed in each spray with precision to the nearest millilitre. Each time that you want to activate the spray, you need to press the button located on the gun. With SPARAMOSCA you have the certainty of always distributing the right quantity of product per plant and of applying a uniform treatment across the entire plot.
SPARAMOSCA received the "Technical Novelty" at AGRILEVANTE 2013.
SEE SPARAMOSCA PARTS
Download the User Manual (pdf)
ADJUSTING THE SPRAY WITH PRECISION
Adjusting the spray to the nearest millilitre is very easy.
• Adjust the wheel to increase or decrease the quantity of product (from 5 to 60 ml)
• Check if the quantity dispensed is as desired using the graduated measuring cup supplied.
By turning the adjustable jet you can determine the width of the spray.
If you do not want to distribute spray jets, simply move the switch located near the wheel.
The switch has three positions: Timed, Off and Continuous.
• Timed: spray mode
• Off: shuts off the power to the control unit
• Continuous: the jet is dispensed as long as the button on the gun is pressed
DISTRIBUTING SPINTOR FLY
Thanks to the experience that we have acquired on the field, we can advise you on the use of Spintor Fly.
Since this is an adulticide, the most important advice is to act promptly at the first signs of flying flies, before it can begin to lay eggs, and always follow the plant protection bulletins in your area.
Spintor Fly is an insecticide bait based on Spinosad produced by Dow AgroSciences. It is necessary to prepare a mixture of 5 l/ha (1 part product + 4 parts water) and produce sprays of large droplets, located on a 30/40 cm portion of the foliage. In plots with up to 100 plants per hectare, we suggest you treat all plants. In intensive crops, you should treat every other plant, or every other row. Suppose we have 300 plants and we need to treat 150. If we make a quick calculation, we can determine the dose for every single spray: 5,000 ml (5 litres): 150 = 33.3 ml.
With our microdosing sprayers, you can set 33 ml per spray, and be certain that you achieve uniform treatment, without waste and at maximum effectiveness.
For more information on this product please visit the official.
Net weight: 6,670 kg
Gross weight: 8,500 kg
Dimensions: 36 x 50 x 20 cm
Packaging dimensions: 60 x 40 x 30 cm
Voltage: 12V
Pump: Electric membrane
Free flow rate: Max. 3 l/min
Flow rate with nozzle 110° 003 1 l/min
Pressure: 3.1 bar
Tank capacity: 12 Litres
Battery life (continuous) H. 4
Battery life (timed 20 ml) approximately 9,000 sprays
Duration of a recharging cycle H. 12
Primary Battery charger 230 V. 50 Hz - Secondary 12V 10VA
Noise level: Less than 70 dB